Rugged outdoor / marine / splash-zone UHF RFID
Waterproof UHF RFID Outdoor Tag
IP68/IP69K Rugged
Quick answer
Waterproof UHF RFID outdoor tags carry IEC 60529 IP67 / IP68 ratings, with IP69K wash-down variants surviving 80 °C at 100 bar. Corrosion posture spans ISO 12944 C5-M marine to CX offshore with 316L stainless hardware, and ATEX / IECEx variants cover Zone 1 / 2 / 21 / 22. Proud Tek builds six form factors with Impinj M750 / M775 and NXP UCODE 9xe class chips reading at 3-12 m, qualified to a 10-year outdoor life.
- IEC 60529 IP68 continuous submersion + IP69K 80 °C 100 bar wash-down + NEMA 250 Type 4X / 6 / 6P; ATEX 2014/34/EU + IECEx hazardous-area variants for Zone 1 / 2 / 21 / 22.
- ISO 12944 C5-M marine and CX offshore corrosivity qualification + NACE SP0492 + NORSOK M-501 coating compliance; 316L stainless hardware; ASTM B117 96 h salt spray + ISO 9227 cyclic corrosion.
- Impinj M750 / M770 / M775 + NXP UCODE 9xe + Alien Higgs-9 long-range UHF chips (3-12 m read range) with GS1 SGTIN / GIAI / GRAI identifiers and EPCIS 2.0 ObjectEvents into Maximo / SAP / Oracle / Bentley AssetWise.
Used in these industries
Deployments where this product is referenced on our industry landing pages.
At a glance
Use these short answers to decide whether this page matches the project before moving into the detail.
Chip options
Impinj Monza R6-P — cost-optimised mass outdoor asset Impinj M750 / M770 / M775 — long-range + Autotune dense-metal / wet-environment
Ingress protection (IEC 60529 + NEMA + ISO)
IP67 — 1 m / 30 min temporary immersion IP68 — continuous submersion per manufacturer spec (typically 1-3 m / 24-72 h)
Next step
Ready to move forward? Start your inquiry to get specific answers for this project.
Request waterproof UHF outdoor RFID quote + ATEX / IECEx / IP69K test report- Corrosion posture (ISO 12944 + NACE + NORSOK)
-
- ISO 12944-2 corrosivity categories — C1 / C2 / C3 / C4 / C5 / C5-M (marine) / CX (offshore)
- ISO 12944-5 paint systems for C5-M + CX durability classes H (high) / VH (very high)
- NACE SP0492-2020 metallic-coating field inspection
- NORSOK M-501 Surface preparation and protective coating (offshore)
- ASTM B117 neutral salt-spray 96-500 h per durability class
- ISO 9227 cyclic corrosion + ISO 12944-9 offshore protective-coating performance requirement
- Hazardous-area posture (ATEX / IECEx / NEC / CEC)
-
- ATEX Directive 2014/34/EU + IECEx Scheme Zone 1 (Ex db / Ex ib) + Zone 2 (Ex nA / Ex ec) gas
- ATEX + IECEx Zone 21 (Ex tb) + Zone 22 (Ex tc) dust
- UL 913 Intrinsic Safety / UL 121201 Nonincendive + FM 3610 / FM 3611
- NEC 500 Class I Division 1 / 2 (gas) + Class II Division 1 / 2 (dust); CEC Section 18
- T-rating T3 / T4 / T5 / T6 for surface-temperature classification
- Gas group IIA / IIB / IIC + dust group IIIA / IIIB / IIIC
- Shock / vibration / thermal (MIL-STD-810H)
-
- Method 501.7 High Temperature + Method 502.7 Low Temperature
- Method 503.7 Temperature Shock + Method 507.7 Humidity
- Method 509.7 Salt Fog + Method 512.7 Immersion
- Method 514.8 Vibration (Category 4 truck + Category 5 propeller aircraft)
- Method 516.8 Shock (Procedure I Functional + Procedure IV Transit Drop)
- Operating -40 °C / +85 °C; survival -55 °C / +125 °C
- UV + outdoor life (ASTM + ISO)
-
- ASTM G154 QUV Cycle 1 — 8 h UV at 60 °C + 4 h condensation at 50 °C, 2,000 h exposure
- ASTM D4329 Plastics Exposure to Fluorescent UV — 2,000 h
- ASTM G155 Xenon-arc weathering + ISO 4892-2
- 10-year outdoor life qualification with UV-stabilised polycarbonate / ABS / silicone
- Thermal cycling 50 cycles -40 °C / +85 °C + humidity 500 h at 85 % RH
- Form factors (6 SKUs)
-
- On-metal ABS / polycarbonate rugged disc — mounted with 3M VHB or 316L stainless screw
- Cable-wrap silicone loop — pipe / cable / hose / winding-drum (ø 5-60 mm)
- Bolt-mount industrial anchor — 316L M6 / M8 / M10 through-bolt fastening
- Offshore-rated marine plaque — 316L 2 mm backplate + PTFE gasket + EPDM grommet
- ATEX / IECEx intrinsically-safe hazardous-area — certified Zone 1 / 21 with Ex ib + Ex tb
- IP69K food-and-pharma sanitary wash-down — FDA 21 CFR 177.2600 elastomer + EHEDG-compatible
- Air interface & identifiers
-
UHF Gen2v2 / RAIN RFID per EPCglobal + ISO/IEC 18000-63. Bands: US 902-928 MHz FCC Part 15.247; EU 865-868 MHz ETSI EN 302 208; JP 916-923 MHz ARIB STD-T106; CN 920-925 MHz SRRC; KR 917-923.5 MHz; IN 865-867 MHz; BR 902-907.5 / 915-928 MHz. GS1 SGTIN-96 (asset + serial) / GIAI-96 (individual asset) / GRAI-96 (returnable asset) per GS1 General Specifications v24 + EPC Tag Data Standard v2.1. EPCIS 2.0 ObjectEvents integration for bizStep / disposition / bizLocation / readPoint / sensorMetadata.
- Enterprise platforms
-
- IBM Maximo Application Suite + Maximo Linear Asset Manager + Maximo Oil & Gas + Maximo Nuclear
- SAP S/4HANA EAM + SAP Plant Maintenance + SAP IS-Utilities + SAP IS-Oil
- Oracle eAM + Oracle Utilities Work & Asset Management + Oracle Cloud Maintenance
- Bentley AssetWise APM + iTwin + InspectTech + OpenUtilities + SYNCHRO + OpenBridge
- AVEVA PI System + AVEVA APM + AVEVA Asset Performance + Hexagon EAM + Hexagon PAS PlantOps
- GE Digital APM (Meridium) + ABB Ability Asset Vista + Rockwell Plex + PTC ServiceMax + ServiceNow FSM
- AgileAssets + Kaivon + UpKeep + Fiix + Limble + IFS Ultimo
- Deployment industries
-
- Oil & gas — upstream wellhead / midstream pipeline / downstream refinery (ATEX + IECEx + NACE)
- Offshore wind + renewable — ISO 12944 CX + DNV-ST-0126 + IEC 61400-6
- Electric utility — pole / transformer / substation tagging (NESC + ANSI C2)
- Water / wastewater — AWWA + ASCE + NSF/ANSI 61 + Manhole + lift-station
- Construction + heavy equipment — ISO 9001 + MIL-STD-810H vibration
- Food & pharma sanitary — FDA 21 CFR 177 + EHEDG hygienic design + 3-A Sanitary Standards
- Agriculture — irrigation / vineyard / orchard / livestock-infrastructure; USDA FIA + ISO 11784/11785 adjacency
- MOQ / Lead time
-
Standard Monza R6-P / UCODE 9 on-metal disc: 2,000 pcs / 10-15 business days; Impinj M750 / M770 / M775 long-range: 2,000 pcs / 15-20 business days; offshore 316L marine plaque: 500 pcs / 20-25 business days; ATEX / IECEx certified hazardous-area SKU: 500 pcs / 25-35 business days (includes certification-body letter on request); IP69K sanitary wash-down: 1,000 pcs / 15-20 business days; FM13UF08 digital-signature anti-forgery: 1,000 pcs / 20-25 business days
- Warranty & QC
-
10-year outdoor life; COC with chip family + GS1 SGTIN / GIAI / GRAI assignment log + IEC 60529 IP rating test lot + ISO 12944 corrosivity category + ATEX / IECEx certificate reference (hazardous-area SKU) + MIL-STD-810H test method log + ASTM G154 / D4329 / B117 / ISO 9227 qualification reports; ISO 9001:2015 QMS; IATF 16949 for automotive-yard fleet variants on request
- Typical pricing
-
USD 0.60–2.50 /pc by size (typical FOB Shenzhen range) — firm quote in one business day.
Commercial terms
- MOQ
- Varies by SKU — stock items from 100 pcs; custom production typically 200-1,000 pcs
- Lead time
- Production 2-3 weeks after artwork and encoding sign-off; reorders on a 3-4 week cycle
- Samples
- Free samples and RF test report with every order; courier at customer cost
- Payment
- 50% T/T deposit, 50% before shipment; Net 30/60 for established accounts; LC for large orders
- Shipping
- FOB Shenzhen / Yantian; DHL, FedEx or EMS air freight; sea LCL / FCL for volume
- Response
- Itemized quote within one business day, Mon-Fri (UTC+8)
Regulatory context: waterproof outdoor UHF RFID tag selection is a six-standard decision
Selecting a waterproof outdoor UHF RFID tag reduces to a six-standard decision matrix.
An oil & gas upstream wellhead programme in the North Slope specifies ATEX Zone 1 Ex ib IIC T4 Gb + IECEx + NEC Class I Div 1 Group D with ISO 12944 C5-M (marine) or CX (offshore) corrosivity. MIL-STD-810H Methods 501.7 + 502.7 cover low-temperature survival. A food & pharma sanitary wash-down programme in a USDA-inspected meat plant specifies IP69K + FDA 21 CFR 177 elastomer + EHEDG hygienic-design elastomer + 3-A Sanitary Standards + stainless 316L through-bolt. An urban-utility pole-tagging programme specifies IP67 + ISO 12944 C3-C4 + NESC + ANSI C2 + GS1 GIAI-96 for GIS integration.
Identifier architecture carries the EPCIS 2.0 ObjectEvents stream into the enterprise EAM / APM estate. Target platforms include IBM Maximo Application Suite, SAP S/4HANA EAM, Oracle eAM / Utilities WAM, Bentley AssetWise APM + iTwin, AVEVA PI + APM, Hexagon EAM, GE Digital APM (Meridium), ABB Ability, AgileAssets, InspectTech, ServiceNow FSM, PTC ServiceMax, and Rockwell Plex. Each platform ingests SGTIN / GIAI / GRAI via EPCIS 2.0 + GS1 EPCglobal Application Level Events (ALE) 1.1.1 + ISO/IEC 19987 GS1 EPCIS.
- Ingress protection — IEC 60529 IP67 / IP68 / IP69K + ISO 20653 + NEMA 250 Type 4X / 6 / 6P + UL 50E.
- Corrosion posture — ISO 12944 C1-C5-M-CX + NACE SP0492 + NORSOK M-501 + ASTM B117 + ISO 9227.
- Hazardous-area certification — ATEX 2014/34/EU + IECEx + UL 913 + NEC Class I Div 1 / 2 + CEC Section 18.
- Shock / vibration / thermal envelope — MIL-STD-810H Methods 501-516.
- UV + weathering — ASTM G154 + D4329 + G155 + ISO 4892-2.
- Identifier architecture — GS1 SGTIN-96 / GIAI-96 / GRAI-96 + EPCIS 2.0 ObjectEvents.
Key performance metrics
Commodity outdoor tag vs Proud Tek rugged-standard build
Commodity sourcing pattern
- Generic 'IP67' claim with no IEC 60529 test report; water ingress within 6 months in splash / wash-down
- No ISO 12944 corrosivity category specified; carbon-steel hardware corrodes in C4 / C5-M within 1-2 years
- No hazardous-area certification; tag installation in Zone 1 / 2 / 21 / 22 areas voids facility ATEX compliance
- PET / paper label adhesive fails in 2-3 seasons of UV + thermal cycling; tag separates from asset
- No GS1 identifier assignment log; SGTIN / GIAI / GRAI collisions at 10k+ fleet scale
- No EPCIS 2.0 integration; Maximo / SAP / Oracle / Bentley platforms need manual record-to-tag reconciliation
Proud Tek rugged-standard build
- IEC 60529 IP67 / IP68 / IP69K + ISO 20653 + NEMA Type 4X / 6 / 6P test report per batch
- ISO 12944 C1 through CX durability class selectable; 316L stainless hardware standard; NACE SP0492 + NORSOK M-501 compliant
- ATEX 2014/34/EU + IECEx + UL 913 + NEC Class I Div 1/2 certification on hazardous-area SKU; certificate-body letter on request
- ASTM G154 QUV + ASTM D4329 + ASTM G155 + ISO 4892-2 UV qualification; 10-year outdoor life
- GS1 General Specifications v24 SGTIN-96 / GIAI-96 / GRAI-96 per-batch assignment log; EPC Tag Data Standard v2.1 compliant
- EPCIS 2.0 ObjectEvents integration dossier for Maximo + SAP + Oracle + Bentley + AVEVA + Hexagon + GE Digital + ABB + Rockwell + ServiceNow
Ingress protection decision matrix
| IP rating | Test condition (IEC 60529) | NEMA equivalent | Best for |
|---|---|---|---|
| IP67 | Immersion 1 m / 30 min | Type 6 (occasional submersion) | General outdoor asset, urban utility pole, construction yard |
| IP68 | Continuous immersion per mfr (typically 1-3 m / 24-72 h) | Type 6P (prolonged submersion) | Flood-prone, near-water, underground vault, manhole, offshore splash |
| IP69K (ISO 20653) | 80 °C / 100 bar / 14-16 L·min⁻¹ wash-down | Type 4X (wash-down corrosion-resistant) | Food + pharma sanitary, dairy parlour, meat plant, USDA-inspected CIP |
| IP66 + IP67 | High-pressure jet + 1 m immersion | Type 4X + Type 6 | Marine deck, offshore platform, bilge pump, splash + immersion combined |
Hazardous-area certification paths (ATEX / IECEx / NEC)
| Zone (IEC/ATEX) | Class / Division (NEC) | Protection concept | Typical deployment |
|---|---|---|---|
| Zone 0 (continuous gas) | Class I Division 1 Group B/C/D | Ex ia IIC T4 (intrinsic safety) | Reactor vessel, tank interior (rare for RFID) |
| Zone 1 (likely gas) | Class I Division 1 | Ex ib IIC T4 or Ex db IIB T4 (flameproof) | Refinery crude distillation, LNG terminal, offshore wellhead |
| Zone 2 (occasional gas) | Class I Division 2 | Ex nA / Ex ec IIC T4 (nonincendive) | Petrochemical plant perimeter, compressor station |
| Zone 21 (likely dust) | Class II Division 1 | Ex tb IIIC T135 (dust-protected enclosure) | Grain silo, flour mill, sugar refinery, pharma API plant |
| Zone 22 (occasional dust) | Class II Division 2 | Ex tc IIIC T135 | Cement plant, coal storage, wood-processing dust zone |
ISO 12944 corrosivity categories — marine + offshore qualification
Operating playbook — outdoor / rugged programmes
Oil & gas upstream + midstream + downstream operators commonly specify ATEX Zone 1 Ex ib IIC T4 + IECEx + NEC Class I Div 1 Group D tags on wellheads, Christmas trees, pigging-launcher stations, manifolds, separators, compressor stations, and refinery unit operations. Corrosion posture lands on ISO 12944 C5-M (coastal refinery) or CX (offshore platform) with 316L through-bolt mounting and NORSOK M-501 + NACE SP0492 qualified coating. Chip selection commonly spans Impinj M775 or NXP UCODE 9xe with GS1 GIAI-96 individual-asset identifier feeding EPCIS 2.0 into IBM Maximo Oil & Gas, SAP S/4HANA EAM IS-Oil, Oracle EBS eAM, Bentley AssetWise APM, AVEVA PI + APM, and Hexagon EAM.
Offshore wind + renewable operators (Ørsted, Vestas, Siemens Gamesa, GE Renewable Energy, Equinor, RWE) commonly specify ISO 12944 CX + IEC 61400-6 Tower & Foundations + DNV-ST-0126 support-structures qualification. Tag form factors include 316L stainless plaque on tower doors, blade-root anti-metal discs for rotating-component inspection, and nacelle platform tags tied into DNV Nexus + DNV Veracity + Bazefield + Siemens Gamesa Gamesa Digital + Vestas Power Plant Solutions + GE Digital APM (Meridium).
Electric utility + transmission operators commonly specify IP67 + ISO 12944 C3-C4 + NESC + ANSI C2 + ANSI O5.1 (wood pole) tags on distribution poles, transformers, substations, cross-arms, and conductor infrastructure. GIAI-96 + GPS geolocation flows into ESRI ArcGIS GeoBIM, AssetWise, and Oracle Utilities Work & Asset Management; vehicle-mounted + drone-mounted + handheld scan workflows support storm-damage assessment and vegetation-management programmes.
Food & pharma sanitary programmes commonly specify IP69K + FDA 21 CFR 177.2600 elastomer + EHEDG hygienic-design + 3-A Sanitary Standards + USDA-inspected meat / dairy plant wash-down. Chip options favour NXP UCODE DNA (AES-128 authenticated) for anti-counterfeit SKU routing. Platforms include TraceGains, SafetyChain, FoodLogiQ, Lloyd's Register LR QA, SGS Digicomply, and Infor M3 Food & Beverage.
Construction + heavy-equipment + yard-management programmes commonly specify MIL-STD-810H Methods 514.8 + 516.8 vibration + shock qualification with UHF cable-wrap silicone loop or bolt-mount 316L stainless plaque. Platforms include Procore, Autodesk Construction Cloud, HammerTech, B2W ONE, Tenna, Samsara, Trackunit, HCSS HeavyJob, and Viewpoint / Trimble Spectrum.
Deployment timeline
- Week 0-3 — regulatory + environmental scoping
IP rating selected (IP67 / IP68 / IP69K + NEMA Type 4X / 6 / 6P); ISO 12944 corrosivity category (C3-CX) confirmed; ATEX / IECEx zone + gas group IIA / IIB / IIC + T-rating assigned (hazardous-area SKU); MIL-STD-810H methods shortlisted (501-516); UV + weathering qualification plan (ASTM G154 / D4329 / G155).
- Week 3-8 — chip + form factor + identifier policy
Monza R6-P / M750 / M770 / M775 / UCODE 9 / UCODE 9xe / UCODE DNA / Higgs-9 / FM13UF08 chosen. Form factor selected from on-metal disc / cable-wrap / bolt-mount / marine plaque / ATEX SKU / IP69K sanitary. GS1 issuer code + SGTIN / GIAI / GRAI encoding rules + EPCIS 2.0 bizStep / disposition / bizLocation schema locked.
- Week 8-14 — pilot batch + qualification testing + EAM integration
500-5,000 pc pilot. IEC 60529 test report generated. ASTM B117 + G154 + MIL-STD-810H test lot documented. ATEX / IECEx certificate referenced (hazardous-area SKU). Maximo / SAP / Oracle / Bentley AssetWise / AVEVA PI / Hexagon EAM EPCIS 2.0 integration verified end-to-end.
- Month 3-24 — scale + requalification + audit cycle
Production scales to 50k-500k pc. Quarterly IEC 60529 + ASTM B117 + ISO 9227 + ASTM G154 requalification per lot. Hazardous-area SKU: annual ATEX / IECEx surveillance audit. Food + pharma SKU: IP69K + EHEDG + 3-A Sanitary Standards surveillance. EPCIS 2.0 ObjectEvents stream monitored for bizLocation telemetry, disposition transitions, and sensorMetadata integration.
Chip family selection by UHF sensitivity and memory budget
| Chip | Read range | EPC / user memory | Best for |
|---|---|---|---|
| Impinj Monza R6-P | 3-6 m | 96 bit EPC + 32 bit user | Cost-optimised mass outdoor + utility pole + construction yard |
| Impinj M750 / M770 | 4-8 m | 128 bit EPC + 64 bit user + Autotune | Dense-metal industrial; Autotune compensates environmental detuning |
| Impinj M775 | 6-12 m | 128 bit EPC + 32 bit user + RFMicron sensor + Autotune | Vehicle drive-by, yard-management portal, long-range fleet |
| NXP UCODE 9 / 9xe | 4-8 m | 128 bit EPC + 96 bit user | Extended user memory for GIAI + plate text + maintenance notes |
| NXP UCODE DNA / DNA City | 3-6 m | 128 bit EPC + 224 bit user + AES-128 | Anti-counterfeit, anti-vandal urban, municipal audit integrity |
| Alien Higgs-9 | 4-8 m | 96 bit EPC + 688 bit user | Global EU + US band tuning + robust wet-RF |
| FM13UF08 | 3-6 m | 128 bit EPC + 256 bit user + ECDSA | EUDR / CITES / high-risk anti-forgery digital signature |
Useful next pages
Use these linked product, guide and comparison pages to keep the next click specific and practical.
Related rugged RFID tag products
Explore specialised tags for demanding industrial environments.
Chip-level technical reference
Deep-dive specifications and chip-family comparisons relevant to this SKU.
FAQ
What's the difference between IP67, IP68, and IP69K?
IP67 (IEC 60529) covers temporary immersion to 1 m for 30 min — standard for general outdoor asset tracking. IP68 covers continuous immersion per manufacturer specification, typically 1-3 m for 24-72 h — for flood-prone, underground vault, or near-water permanent installations. IP69K (ISO 20653) covers high-pressure wash-down at 80 °C / 100 bar / 14-16 L·min⁻¹, 30 sec per face from 0 / 30 / 60 / 90° angles — mandatory for food, dairy, meat, and pharma sanitary CIP (clean-in-place) wash-down environments. NEMA 250 equivalents map IP67 → Type 6, IP68 → Type 6P, IP69K → Type 4X wash-down-corrosion-resistant.
How do I choose between ATEX, IECEx, and NEC hazardous-area certification?
ATEX (2014/34/EU) is the EU framework; IECEx is the international (33+ member economies) framework; NEC Class / Division is the North American framework. For a hazardous-area installation in the EU, ATEX Zone 1 Ex ib IIC T4 Gb is typical for gas atmospheres (refinery crude distillation, LNG terminal, offshore wellhead). For global deployments, IECEx provides cross-border acceptance. For US + Canada, NEC Class I Division 1 Group B / C / D (gas) + Class II Division 1 (dust) paired with UL 913 intrinsic safety is the standard path. Gas groups IIA (propane) / IIB (ethylene) / IIC (hydrogen, acetylene) reflect the explosive mixture; T-ratings T3 (200 °C) / T4 (135 °C) / T5 (100 °C) / T6 (85 °C) reflect surface-temperature class.
What read range do I get with a long-range outdoor UHF tag?
3-12 m depending on chip, antenna, and environment. Impinj Monza R6-P delivers 3-6 m cost-optimised. Impinj M750 / M770 delivers 4-8 m with Autotune for dense-metal environments. Impinj M775 delivers 6-12 m with optional RFMicron sensor for vehicle drive-by and yard-management portals. NXP UCODE 9xe delivers 4-8 m with 128-bit EPC for extended identifier encoding (no user memory on UCODE 9xe per NXP SL3S1216 datasheet); UCODE 9xm is the variant when on-tag user data is needed. Alien Higgs-9 delivers 4-8 m with robust wet-RF performance. Read range degrades with wet surfaces, heavy metal environment, and tag-to-reader orientation; Autotune chips compensate for detuning in wet / cold / hot / dense-metal operating conditions.
Can the tag be installed directly on metal assets?
Yes — Proud Tek's on-metal SKU uses a PCB antenna with ferrite backing or foam spacer that decouples the radiator from the metal surface, preserving read range. Mounting options include 3M VHB industrial adhesive, 316L stainless M6 / M8 / M10 through-bolt, cable-wrap silicone loop (5-60 mm diameter range), or bolt-mount anchor with PTFE gasket + EPDM grommet (offshore SKU). Non-metal-mount tags installed directly on steel / aluminium / copper lose 70-90 % of read range; always specify whether the asset is metallic when scoping the programme.
What identifier should I use — SGTIN, GIAI, or GRAI?
GS1 General Specifications v24 + EPC Tag Data Standard v2.1 define three relevant identifiers. SGTIN-96 (Serialised Global Trade Item Number) carries a GTIN + serial — used for product-level tracking of identical SKU. GIAI-96 (Global Individual Asset Identifier) carries a per-asset serial — used for fixed-asset tracking where every tag is unique (utility pole, pump, wind-turbine blade, wellhead). GRAI-96 (Global Returnable Asset Identifier) carries a returnable-asset serial — used for reusable containers, pallets, cylinders, and rental-fleet equipment. Most outdoor / industrial / energy / utility programmes use GIAI-96; pallet / container / cylinder programmes use GRAI-96; packaged-goods / SKU-level programmes use SGTIN-96.
Sources & references
Primary standards, OEM datasheets and regulatory documents cited by this article. All URLs were verified on the access date shown below.
- IEC 60529:2013+AMD1:2013+AMD2:2013 — Degrees of protection provided by enclosures (IP Code)
Governs IP6X / IPX7 / IPX8 test methods for water + dust ingress across outdoor RFID enclosures.
- ISO 20653:2013 Road Vehicles — Degrees of Protection (IP-Code K)
Defines IP69K 80 °C / 100 bar high-pressure wash-down test for sanitary + vehicle wash-down SKU.
- ISO 12944-2:2017 + ISO 12944-5:2019 + ISO 12944-9:2018 — Paints and varnishes, corrosion protection
Defines corrosivity categories C1 through CX + durability classes + offshore coating (Part 9).
- ATEX Directive 2014/34/EU — Equipment for explosive atmospheres
EU framework for hazardous-area Zone 1 / 2 / 21 / 22 equipment; certification via notified body.
- IECEx Scheme — International Certification for Explosive Atmospheres
Global certification scheme for Ex-rated equipment; recognised in 33+ member economies.
- NEMA 250-2020 Enclosures for Electrical Equipment (1,000 Volts Maximum)
North American Type 1 / 3 / 3R / 4 / 4X / 6 / 6P / 12 enclosure framework for outdoor RFID posts.
- MIL-STD-810H Department of Defense Test Method Standard
Methods 501.7 / 502.7 / 503.7 / 507.7 / 509.7 / 512.7 / 514.8 / 516.8 govern thermal + humidity + salt + vibration + shock qualification.
- ASTM G154-23 Standard Practice for Operating Fluorescent UV Light Apparatus
QUV accelerated-UV weathering test for plastic enclosure 2,000 h qualification.
- GS1 General Specifications v24 + EPC Tag Data Standard v2.1
Governs SGTIN-96 / GIAI-96 / GRAI-96 encoding and EPCIS 2.0 ObjectEvents format.
- NORSOK M-501 Surface preparation and protective coating (Rev. 7)
Norwegian Continental Shelf offshore protective-coating standard; governs marine-plaque + offshore RFID installation.
Proud Tek is a Shenzhen-based RFID & NFC manufacturer supplying hotel chains, transit operators, event venues and retail brands worldwide. Every order includes free samples, RF testing and dedicated project support.
Get a Quick Quote
Tell us about your project and we'll respond within one business day. Fields marked (asterisk) are required.